GaN PD140W ukuran cilik paling anyar 2 Port Tipe C + 1 Port pengisi daya USB
SPESIFIKASI FOR APPROVAL
Nama Produk: GaN 140W Charger
Nomer Model: PQ1401P
Gan PD140W
Gambar Pengisi Daya GaN 140W
Gambar Pengisi Daya GaN 140W
Gambar Pengisi Daya GaN 140W
Gambar Pengisi Daya GaN 140W
1. LINGKUP:
Produk iki minangka produk konsumen.Bisa digunakake kanggo identifikasi cerdas lan ngisi daya piranti Bluetooth, ponsel, tablet lan produk elektronik digital liyane. Iki minangka konverter AC menyang DC kanthi kombinasi pangisi daya lelungan portabel.
1.1.Katrangan
USB CHARGER/ USB SMPS Adaptor (Desktop)
Bukak Frame liyane
“＊"iku produksi perusahaan lan QA kudu nguji barang.
2. KARAKTERISTIK INPUT:
| 2.1＊ | Range voltase input | 90Vac - 264Vac |
| 2.2＊ | Range tegangan normal | 100Vac - 240Vac |
| 2.3＊ | Rentang frekuensi input | 47Hz-63Hz |
| 2.4＊ | Dirating frekuensi input | 50Hz/60Hz |
| 2.5＊ | maksimal input saiki | 2.0Amax.ing kondisi mbukak lengkap |
| 2.6 | Surge saiki (dingin wiwitan) | 80 Maks.@ 264Vac input |
| 2.7＊ | Efisiensi (Rata-rata(kondisi output:20 V/5.0A),≧88.0% | Ing 115/230Vac.(Tes sawise 30 menit kerja） |
| 2.8＊ | Daya tanpa beban (ing 115VAC/230VAC). | Kurang saka 0.3W |
3. KARAKTERISTIK OUTPUT:
3.1.＊Proyek uji (140W)
| TIPE-C1(140W) | Port output | MIN (V/A) | Standar (V/A) | MAKS (V/A) | OCP (A) | Tetembunganes |
| 5 Tegangan | 4.75 | 5.0 | 5.25 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 9 Tegangan | 8.55 | 9.0 | 9.45 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 12 Tegangan | 11.4 | 12.0 | 12.60 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 15 Tegangan | 14.25 | 15.0 | 15.75 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 20 Tegangan | 19.0 | 20.0 | 21.0 |
|
| |
| saiki | 0.0 | 5.0 |
| 5.1-5.8 |
| |
| Tegangan 28 V | 26.6 | 28.0 | 29.4 |
|
| |
| saiki | 0.0 | 5.0 |
| 5.1-5.8 |
| |
| 注：输出20V/5A需要输出Tipe-C的线中含有E-MARK芯片，否者只能输出20V/3A, | ||||||
3.2.＊Tes proyek
| JENIS-C2 (100W) | Port output | MIN (V/A) | Standar (V/A) | MAKS (V/A) | OCP (A) | Tetembunganes |
| 5 Tegangan | 4.75 | 5.0 | 5.25 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 9 Tegangan | 8.55 | 9.0 | 9.45 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 12 Tegangan | 11.4 | 12.0 | 12.60 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 15 Tegangan | 14.25 | 15.0 | 15.75 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 20 Tegangan | 19.0 | 20.0 | 21.0 |
|
| |
| saiki | 0.0 | 5.0 |
| 5.1-5.8 |
3.3.＊Tes proyek
| USB-A (30W) | Port output | MIN (V/A) | Standar (V/A) | MAKS (V/A) | OCP (A) | Tetembunganes |
| 5 Tegangan | 4.75 | 5.0 | 5.25 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 9 Tegangan | 8.55 | 9.0 | 9.45 |
|
| |
| saiki | 0.0 | 3.0 |
| 3.1-3.6 |
| |
| 12 Tegangan | 11.4 | 12.0 | 12.6 |
|
| |
| saiki | 0.0 | 2.5 |
| 2.6-3.0 |
| |
| 20 Tegangan | 19.0 | 20.0 | 21.0 |
|
| |
| saiki | 0.0 | 1.5 |
| 1.6-2.2 |
3.4.＊Tes proyek(Output gabungan)
| JENIS-C1+JENIS-C2+USB-A | |||
| JENIS-C1 | JENIS-C2 | USB-A | TOTAL |
| 100W | NC | 18W | 118W |
| 100W | 20W | NC | 120W |
| 100W | 20W(5V/2A+5V/2A) | 120W | |
| NC | 20W(5V/2A+5V/2A) | 20W | |
3.5.＊Tes proyek
| output port | pangandikan |
| ＊Perlindungan sirkuit pendek port tunggal | Sirkuit cendhak bakal mlebu mode proteksi burp, lan bakal pulih kanthi otomatis sawise sirkuit cendhak ilang. |
| ＊ Wektu tundha wiwitan | 2s maks ing 115Vac kanggo input 230Vac & mbukak lengkap |
| Wektu munggah | 40ms maksimal ing input 115Vac lan output beban maksimal. |
| Tahan wektu | a.10ms min ing beban lengkap & input 115Vac/60Hz, mateni ing kasus paling awon b.20ms min ing beban lengkap & input 230Vac/50Hz, mateni ing kasus paling awon |
| Output Overcharge / Undecharger | 10% maksimal nalika sumber daya urip / mateni
|
| Output Load Transient Response | Tegangan output ing ± 5%, mbukak langkah saka 25% kanggo 50% kanggo 25%, 50% kanggo 75% kanggo 50%, R/S: 0.25A/us Transient wektu Recovery respon: 200uS Dynamic overshoot: ± 5% |
| pangayoman liwat voltase | Tegangan output kudu dilindhungi dening IC clamped internal |
| ＊Total output daya sirkuit cendhak | Nalika ana short circuit, daya output kurang saka 5W lan ora bakal ngrusak produk.Sawise sirkuit cendhak ilang, bakal diterusake kanthi otomatis. |
3.6 Protokol Pengisian Daya & Identifikasi Cerdas
| USB-A (Nyokong ) | QC2.0 QC3.0 |
| BC1.2 Samsung 2.0A APLLE 2.4A | |
| FCP SCP VOOC | |
| PE1.0 PE2.0 | |
| AFCliyane | |
| JENIS-C (Nyokong ) | QC2.0 QC3.0 QC4.0 QC4.0+ |
| PD2.0 PD3.0 PD3.1(C1口）PPS(C1口） | |
| BC1.2 Samsung 2.0A APLLE 2.4A | |
| FCP SCP VOOC | |
| PE1.0(C1口）PE2.0(C1口） | |
| AFCliyane | |
| pangandikan: |
3.7.＊Ripple output
| 5V/9V/12/15V/20V Otegangan output ripple 5V/9V/12/15V/20V | 200mV(Maks） | Pangukuran ditindakake kanthi oscilloscope bandwidth 20MHz lan output sejajar karo kapasitor keramik 0.1uF lan kapasitor elektrolisis 10uF.(Ing kondisi input lan output sing dirating) |
| 28Vripple tegangan output | 300mV(Maks） |
4. Syarat Lingkungan
4.1. Suhu operasi lanKelembapan Relatif
0℃kanggo+25℃
10%RHnganti 90%RH
4.2.Suhu panyimpenan lanKelembapan Relatif
-20℃kanggo +80℃
5%RHnganti 95%RH non-kondensasi@ segaratingkat kudu kurang 2.000 meter.
4.3.Getaran
frekuensi Sapuan: 10 kanggo200Hz, akselerasi: 1.0G (jembaré: 3.5mm).Kedher kanggo0.5jam ing sumbu tegak lurus X, Y, lan Z
4.4.＊ Nyelehake
Ing amba paling dis-advantageous, dhuwur gulung punika 100cm, nyelehake menyang Papan kayu atos 3 kaping, pin bisa mbengkongaken lan Nihan bisa tatu, nanging katon ora bisa struktural rusak lan kudu bisa normal.
5. Requirements linuwih
5.1.＊ Burn-in
Produk kudu ngalami 100% burn-in sadurunge dikirim kanggo njamin kualitas.
5.2.MTBF
MTBF kudu paling sethithik 30.000 jam ing 25 ℃ maks lan kondisi input normal
6. Standar EMI/EMS
6.1.Standar EMI/EMI
| Sertifikat | negara | Standar |
| FCC | USA | FCC PART 15B |
| CE | Eropah | EN55032 EN55024 EN61000-3-2 EN61000-3-3 |
| C-Cik | Australia | AS/NZS CISPR22 |
| KCC | Korea | K32/K35 |
| PSE | Jepang | J55032 |
| CCC | Cina | GB17625.1 |
6.2.Standar EMS/EMS
6-2-1 EN 61000-4-2, syarat discharge elektrostatik (ESD)
| Karakteristik discharge | Teskahanan | Kritéria tes |
| Discharge udara | +/-8KV | B |
| Discharge kontak | +/-4KV | B |
6-2-2 EN 61000-4-3, kerentanan medan elektromagnetik radiasi (rs)
| Tingkat tes | Kritéria tes |
| 3 V/m (rms) | B |
| 80-1000MHz, 80%AM(1KHz) gelombang sinus |
6-2-3 EN 61000-4-4, syarat kakebalan transien cepet listrik (burst)
| Kopling | Tingkat tes | Kritéria tes |
| AC-input | 0.5KV | A |
| AC-input | 1 KV | B |
6-2-4 EN 61000-4-5, syarat kemampuan mundhak
| Tegangan mundhak | Kritéria tes |
| Mode umum/ +/-2KV | A |
| Mode diferensial/ +/-1KV |
6-2-5 EN 61000-4-6, Lapangan frekuensi radio sing diakibatake nglanggar syarat kekebalant
| Tingkat tes | Kritéria tes |
| 3V | B |
| 0.15-80 MHz, 80%AM(1KHz) |
6-2-6 Kritéria Assessment
| Kritéria ditampa | Kinerja
|
| A | Prilaku operasional sing disepakati ing watesan sing ditemtokake |
| B | Penurunan fungsi utawa malfungsi sing diwatesi sajrone tes diidini.Fungsi kasebut diaktifake maneh dening unit sawise tes rampung.
|
| C | Malfunction diijini.Fungsi kasebut bisa diaktifake maneh kanthi nyambungake maneh menyang listrik utawa kanthi campur tangan operator.Sajrone tes, mung piranti protèktif utama sing diidini rusak.piranti bisa dibalèkaké menyang normal,Sawise piranti protèktif utama sing rusak diganti,
|
7. Standar Keamanan
7.1.Kekuatan Dielektrik (Hi-pot)
| Utama nganti Sekunder: 3000Vac / 5mAmax / 60 detik |
7.2.Arus bocor
| 0,25m maks.ing 264Vac / 50Hz |
7.3.Ketahanan Isolasi
| 50MΩ min.ing primer kanggo sekunder nambah voltase test 500Vdc |
7.4.RegulasiStandar
| Sertifikat | negara | Standar |
| UL / UL | USA | UL62368-1 |
| ETL/ cETL | USA | UL62368-1 |
| CE+BS1363 | Inggris | EN62368-1+BS1363 |
| CE | Eropah | EN62368-1 |
| SAA | Australia | AS/NZS60950-1 |
| PSE | Jepang | J62368 |
| S-Mark | Argentina | IEC60950-1 |
| CCC | Cina | GB4943 |
| KC | Korea | K60950-1 |
| PSB | Singapura | IEC60950-1 |
8. cocog.Gambar Outline
UL/PSEplug2C+1A3port dipasang ing tembok (irengomah)
bahan cangkang:PC tahan suhu 120 ℃
PC + ABS suhu resistance 95 ℃
Tetembungane:Materi PC nyukupi syarat tes tekanan bola.
9. I/O Marking Drawing
10. Paket Drawing
Menunggu (Paket Kustomisasi)
